Download Article

Download Commodity

Brita water filtration uses carbon to filter impurities out of your tap water. Y'all can cull several models, including a pitcher, a faucet attachment or a sink dispenser model. Yous should choose your model according to whether you want to but filter drinking water or if y'all want to filter all the water that goes through your sink.

  1. one

    Read the instructions on the Brita water filter cartridge packaging. The installation method has changed within the last few years. If you have older models, y'all volition need to presoak your filter in for fifteen minutes in a drinking glass of water.

    • For all recently purchased filters, follow the remaining instructions.

  2. 2

    Remove the old filter and discard it. Wash your Brita pitcher with soap and water if you haven't done so in the last few weeks.[ane]

    Advertizement

  3. iii

    Wash your hands with soap and water. Unwrap your Brita bullpen filter.

  4. 4

    Turn on the tap. Let common cold water run over your filter for 15 seconds.[2]

  5. 5

    Insert the new filter. Run h2o over the top of the carafe and filter. Repeat every 40 gallons (151.4 Fifty) or ii months.[three]

    6. Advertising

  1. 1

    Purchase a Brita faucet filtration system. Your filtration system should come with 2 adaptors to fit almost kitchen sinks. It is an outside filter that tin can be hands removed and replaced when the filter is no longer constructive.

  2. 2

    Unscrew the encompass on the tap. The Brita filter will need to screw onto the outside threads on the tap. If your sink tap has interior threads, screw on i of the adaptors before you lot install the system.

  3. iii

    Unwrap the base unit. Align the collar with the faucet threads. Plough the attachment carefully to connect the filter system to the faucet.[4]

  4. 4

    Ensure the faucet is secure by turning it tightly with your easily. Test for leaks by turning on the cold water.

  5. 5

    Keep the cold water on. Flush the organisation for v minutes. Information technology will activate the filter and remove carbon dust.[v]

  6. 6

    Use for 100 gallons (378.5 L) before replacing. The dark-green light will indicate the filter is still good. The cerise light indicates y'all should alter the organisation.[six]

    7. Advertisement

  1. one

    Unpack your 3-way filter tap and dispenser. This is the longest installation process, because you are actually replacing your sink tap with a Brita make tap and hoses.

  2. two

    Remove the timer and testing strip. Run your tap water and insert the testing strip Consult the instructions to run into under what filtration setting you lot should fix the filter according to your results.[seven]

  3. 3

    Mount the filter timer to the inside of your sink cabinet, where it volition not get wet.

  4. four

    Turn off your water taps. Identify a saucepan underneath the pipes. Unscrew the pipes with a wrench then that you tin can remove your current kitchen sink faucet.

  5. 5

    Remove all the pieces for the Brita tap and lay it nearby. Continue the directions close at hand in instance you need to identify parts.

  6. 6

    Slip the shank over the three hoses. The shank is a neckband-like metal piece.

  7. 7

    Attach the hoses to the inside of the tap. Spiral the blue hoses into the hole marked "C." Spiral the red hose into the hole marked "H."

    • Spiral the last hose into the pigsty marked "B." Brand sure they are secure.

  8. 8

    Pull the shank toward the tap. Screw it into the bottom of the tap.

  9. 9

    Identify your base on the hole in the kitchen counter, where your old tap was installed.

  10. 10

    Mount the tap to the base. Pull the hoses and shank through the hole.

  11. 11

    Set your counter plate, gasket, locking band and hexagon nut parts underneath the sink so that you can install them hands. Loop them through the hoses in that order.

  12. 12

    Spiral the hexagonal nut into place on the shank. Adjust the dispenser at the top, so that information technology is positioned correctly. Ready the dispenser in place at the bottom using a wrench.

  13. thirteen

    Connect your hoses. The red hose will connect with the hot water supply. Next, insert the gasket into the T-piece, which you will place over the common cold water intake.

  14. 14

    Spiral the T-piece onto the acme of the cold water supply. Insert the gaskets into the remaining hoses. Connect each side to the Brita filter device.[8]

  15. 15

    Insert the filter cartridge into the blue Brita filter device. The system is set. Install the wall mountain to hold your filter device in place so that it can exist unscrewed and replaced when it is no longer effective.

  16. 16

    Turn on the cold water tap. Run the faucet. Cheque for leaks.

  17. 17

    Pay attending to your filter timer so that y'all know when it's time to change. Unlock the current filter, release the pressure handle and pull the filter out. Supersede information technology with a new filter and secure the locking handle.

    • Reset your timer. Recycle your Brita cartridge.[ix]

    18. Advertisement

Add New Question

  • Question

    When I plough my sink on, water comes out from the filtered neck equally well. How can I fix this?

    Community Answer

    There is a well known defect with a certain model that Brita has been repairing, which sounds like the issue you're having. Phone call Brita and run across if they can send out a repairman to prepare the internal plastic pipage that has broken.

Enquire a Question

200 characters left

Include your email address to go a bulletin when this question is answered.

Submit

Advertizement

Cheers for submitting a tip for review!

Things Yous'll Need

  • Brita water pitcher
  • Brita filter
  • H2o tap
  • Brita faucet filtration arrangement
  • Adaptor
  • Brita 3-Way tap dispenser kit
  • Wrench
  • Screwdriver
  • Brita iii-Way tap cartridges
  • Bucket

References

About This Article

Cheers to all authors for creating a folio that has been read 31,856 times.

Did this commodity help you?